Skip to content
Told you need a big repair or a new system? Get a FREE second opinion from Burnside →

Locating Your Heating System Vents

Tips & Advice

Burnside Air Conditioning, Heating & Plumbing

June 26, 2026
3 min
Locating Your Heating System Vents

When’s the last time you took a moment to think about the inner workings and nuances of your heating system? Maybe it’s when you last needed repairs, or perhaps it was that one time you heard a strange rattling coming from your system.

Being aware of how your heating system works, what components are used, and even where the heating vents are located, can help you be prepared to take better care of it when the time comes for repairs or improvements.

Which Distribution System do You Have?

Different heating units require different needs when it comes time to have them serviced. Below are some of the most common units that homeowners through the United States tend to have.

distribution

Being well informed on your own heating system can help you identify problems sooner, and, therefore, identify solutions faster.

Want to Control The Air Flow in a Room? Don’t Close Vents!

vent

If you have a whole-home heater and a room you barely use receiving that heat, you might figure the best way to improve energy expenditure would be to close the vent in that room to allow the rest of the home to be more efficiently heated.

While closing the vent in a particular way may seem like the best option for decreasing the air flow in that room, doing this may actually cause more problems in the long run. The room in your home have supply and return vents. Closing the supply vent (the return vent cannot be closed) in a room will create pressure because then the return vent will need to pull air from any source.

This means that you’ll actually be spending more energy and more money because the return vent will need to work harder to pull it from sources like windows or doors. The ideal way to have better-controlled air flow in a room would be to invest in a system such as a mini-split that would let you control the air in individual rooms.

Looking to Save Money on Your Heating Costs?

Make use of these tips and you won’t find yourself staring at ridiculously high numbers when your energy bill comes around this winter!

money

  • Change Your Filter Often: Dirty filter means higher bills! Make sure you keep a new, clean filter in your system regularly so you don’t hamper the efficiency.
  • Put Your Ceiling Fans in Reverse: Because cold air rises, putting your ceiling fan to work in reverse will push the hot air right back down. This will relieve your thermostat from working so hard. Speaking of which…
  • Turn Down the Thermostat: If you’re going out or even going to sleep, it’s a good idea to turn the thermostat down by just a couple degrees. You likely won’t feel any discomfort while you sleep with plenty of bedding, and your wallet will thank you for it.
  • Get an Energy Audit: Have a tech inspect your home to see where your current energy efficiency is at, and how you can improve it!
  • Get a Heater Tune Up: Have a pro head to your home and give your system a quick tune-up to keep it working efficiently this winter.

Make Sure You’re Prepared This Winter!

Winter is a beautiful time of year, but if you’re sitting on expensive energy bills or wallowing in discomfort in your home, it can sour the holidays. Make sure you stay on top of your heating system so you can enjoy this season in comfort! Share this post with your friends so their home will be as comfortable as your when you visit!

‍

Need Help?

Contact us today to discuss your needs. Our team is ready to help.

About the Author

Burnside Air Conditioning, Heating & Plumbing

More Articles

View All Posts

Related Articles

Preventing Frozen Hose Bibbs: Why Texas Homeowners Must Disconnect Hoses Before the First November Freeze
Tips & Advice

Preventing Frozen Hose Bibbs: Why Texas Homeowners Must Disconnect Hoses Before the First November Freeze

Read Article
Why Your Family Runs Out of Hot Water After Two Showers: Signs Your Water Heater Is Too Small
Tips & Advice

Why Your Family Runs Out of Hot Water After Two Showers: Signs Your Water Heater Is Too Small

Read Article
Understanding the Visual Signs of Rust Inside the Furnace Before Winter
Tips & Advice

Understanding the Visual Signs of Rust Inside the Furnace Before Winter

Read Article
Why We Tell Homeowners to Avoid Pouring Turkey Grease Down the Drain: A Look Inside a Clogged Pipe
Tips & Advice

Why We Tell Homeowners to Avoid Pouring Turkey Grease Down the Drain: A Look Inside a Clogged Pipe

Read Article
What We Learn From Burnside AC Reviews After a Grueling Texas Summer
Tips & Advice

What We Learn From Burnside AC Reviews After a Grueling Texas Summer

Read Article
Signs of Restricted HVAC Airflow: Diagnosing Uneven Winter Heating
Tips & Advice

Signs of Restricted HVAC Airflow: Diagnosing Uneven Winter Heating

Read Article
Preparing Kitchen Plumbing for Holidays: Why to Inspect Your Disposal Before Thanksgiving
Tips & Advice

Preparing Kitchen Plumbing for Holidays: Why to Inspect Your Disposal Before Thanksgiving

Read Article
Why a Furnace Delayed Ignition Boom is Dangerous (And What to Do)
Tips & Advice

Why a Furnace Delayed Ignition Boom is Dangerous (And What to Do)

Read Article
Why Your Furnace Shuts Off After a Few Seconds: Signs of a Dirty Furnace Flame Sensor
Tips & Advice

Why Your Furnace Shuts Off After a Few Seconds: Signs of a Dirty Furnace Flame Sensor

Read Article
What Does an AC Capacitor Do? The Small Silver Cylinder That Starts Your System
Tips & Advice

What Does an AC Capacitor Do? The Small Silver Cylinder That Starts Your System

Read Article
Can I Safely Clean My Furnace Blower Assembly Myself?
Tips & Advice

Can I Safely Clean My Furnace Blower Assembly Myself?

Grabbing a shop vacuum to clear dust from your heating system can severely damage delicate components. See exactly how DIY vacuuming throws the blower wheel out of balance and ruins the motor.

Read Article
How We Calibrate Thermostats to Prevent Overworking Your HVAC System
Tips & Advice

How We Calibrate Thermostats to Prevent Overworking Your HVAC System

A constantly running furnace doesn't always mean a failing system. Often, a simple sensor mismatch is to blame. See how professional calibration saves your heating equipment from unnecessary wear.

Read Article

Ready to Get Started?

Whether you need a repair, maintenance, or a new installation, our expert team is here to help.